Service Hotline: 13510093589
News
  • Service Hotline: 134-2372-8206
  • Address: Shenzhen City Pingshan Ping Central Industrial City 140 - 141
  • mailbox:zxz01@sz_zhonggjjij.com

Use auto parts coating and paint line maintenance

Date: 2016-06-04
Browsing times: 60

Use and maintenance of auto parts painting lines, auto parts paint line electrostatic spraying operations, you can reduce waste and over-coated with paint phenomenon, it is possible to reduce the cleaning and paint waste management costs. Compared with the traditional operation, the disk DISK automatic electrostatic painting production process technology to save 30-60% paint. Auto parts paint line quality improvement: due to electrostatic repulsion of the particles so that the paint had good atomization and ultra-fine particles, so be easier to achieve high standards of surface quality when advanced paint job, a stable end product quality problems can also have a chapter according to.

 

Auto parts painting lines on the workpiece active transport of large quantities, before entering drying tunnel is not the same to carefully check leakage jet, gushing or part Cafen appearance, if found defective parts, should avoid entering into good pass bake and do remove the possible re-spray. As a result of a single piece of thin spray failed, in curing the bake after curing can be re-sprayed again.

 

Impeller fan auto parts paint line cleaning; every month the scheduled date of conservation, administrator with a wrench to tighten the screws loose, spraying operator with a spatula to eradicate industrial paints on the impeller, the impeller marked butter; device again means good impeller and tighten the fastening screws. Usually once every other month.

 

Auto parts paint line cleaning the windshield: the 600 weekly conservation equipment, the user equipment to remove the windshield, scrape off the paint with a scraper plate, clean water washed, dried marked with butter. ,

 

After every Saturday when equipment maintenance, user equipment remove the nozzle, and the device administrator to remove water, paint finishing needs within the tube, washed with water and residual net inside the tube, the end of the cleaning equipment; auto parts paint line cleaning nozzle , means good water nozzle. Nozzle opening in a surface.

 

Auto parts paint line pumps cleaning and maintenance: Monthly Equipment conservation day, spray discharged water injection cabinets, administrator Panasonic fastening screws, remove the pump; clean paint residue on the impeller and clean waterways wall after the paint residue, means good fastening screws.

 

Auto parts painting lines water POON cabinet inner wall cleaning: the user equipment connected to the water supply pipe, open water switch from top to bottom water shower.

 

News / Recommended news More
2016 - 06 - 04
[Bumper spraying equipment]Spray quality bumper extremely strict requirements, pre-processing, spraying to cure the whole process needs to be strictly controlled to ensure the coating quality bumper. Most bumper multilayer coating of wet-jet wet spraying method. [Anchor]The automotive industry has become a pillar industry of the national economy, the rapid development of automotive coating te...
2016 - 06 - 04
It is well known in the automotive coating process electrophoretic paint, which is essential to a drying step. Only after drying in order to obtain the best performance of the film, without causing the occurrence of "dry low" or "too dry" and other quality accidents. Otherwise automobile electrophoresis coating is not drying thoroughly, it will seriously affect the performance ...
2016 - 06 - 04
Use and maintenance of auto parts painting lines, auto parts paint line electrostatic spraying operations, you can reduce waste and over-coated with paint phenomenon, it is possible to reduce the cleaning and paint waste management costs. Compared with the traditional operation, the disk DISK automatic electrostatic painting production process technology to save 30-60% paint. Auto parts paint line...
2016 - 06 - 04
Part of the coating lines of the following: pre-treatment equipment, dusting systems, painting equipment, powder recovery equipment, heating and drying curing bake, heat system, electric control system, suspension conveyor and the like. General metal material spray process:The main process steps to get rid of a corrosion-resistant and can be applied spray coating adhesion "phosphate laye...
Copyright ©2016 - 2017 Zhongjiajia Intelligent Equipment Technology (Guangzhou) Co., Ltd.
犀牛云提供企业云服务
Address: Guangzhou City Ougongling, Matthew Village, Shitan Town, Zengcheng District, Guangzhou
Telephone:+86 0755-2955 6666
Fax:+86 0755-2788 8009
Zip code:330520
二维码
Scan Browse the mobile web site
二维码
Scan Pay attention to the public number